Replacing uPVC Window Handles
It is simple to change the handles on windows made of Upvc. It is important to ensure that the new handle is a good fit for the spindle cut out in the window mechanism.
If you follow the steps below the handle of any cockspur will fit in most windows. The height of the step of the handle is key.
What to look for
Many of the windows in the UK come with uPVC handles and, over time, they will begin to show signs of wear and tear. When this happens, the window handle could become shaky or difficult to operate, making it essential to replace it. Anyone who is comfortable with basic hand tools can complete this relatively simple job.
The first step is to ensure that the handle is securely attached to the window frame and is in an open position. The next step is to locate the screws or pins that hold the handle. They are usually on the inside of the handle. window handles www.repairmywindowsanddoors.co.uk can be removed with a screwdriver and pliers.
When the handle is loose and sagging, it can be removed from its hinges by gently pulling it off. Then, you'll need to find a new handle that is the same dimensions and style. This can be accomplished in an online store or in a DIY store. The process should take only five minutes and a screwdriver is all you need.
One crucial aspect to take into consideration when replacing a uPVC window handle is its step height. This is the distance between the handle's base and the place it is placed in the frame of the window. This is typically an accepted measurement, however it is important to determine the step height of your existing handle before purchasing the new one.
Depending on the type of handle you have there are various sizes that are available. Inline handles can be found for uPVC window with lug centres of 31mm, while cockspur handles come with centers of lugs of 43 millimetres. Tilt-and-turn handles are commonly found on uPVC Windows. They feature a unique design that allows the window to be slid down to let in air and then turned to fully open the window.
The most frequent uPVC handle breakage is internal cracking, instead of a break at the base. This makes them difficult to open and is why it is crucial to ensure that any replacement handle you buy has the same spindle length as your existing one.
Take off the handle from the old one.
If the handles on your windows are damaged or incorrectly installed, they could cause double-glazed windows to not open or close correctly. They could even become stuck. There are a myriad of reasons for this, such as general wear and tear, or corrosion of the handle. In these cases it is essential to seek replacement handles made of upvc as soon as you can to avoid further damage and loss of function.
One of the first things to do when replacing upvc window handles is to remove the old handle from the window. Begin by removing the screw covered by the handle while it is in the closed position. Once you have removed that screw, you can remove the handle. You can make the job simpler by using an electric screwdriver.
It is also important to be aware that screws could be hidden beneath plastic caps. It is recommended to remove the covers with the help of a Stanley knife. After removing the handle, you will be required to inspect the square cutout on the base to make sure that the new handle you choose for the window lock is compatible. It is important to measure the length of the spindle on the old handle and then compare it with the size of the window mechanism spindle cutout.
There are three types of Upvc handles: Espag handles with a central screw that can be turned left or right and Cranked handles with two screws and Spade handles that have arms that are flat and can be used on either side of the upvc window. It is easy to replace the handle when you have identified one that is suitable. Simply screw it into the frame, and make sure the spindle is correctly inserted into the lock mechanism. Once you have done this you can tighten the handle onto the window frame. The new upvc handles should now be secured.
Take a measurement of the Spindle
If you're looking to replace a upvc handle that has fallen, it's likely that the spindle that holds it in place is damaged or loose. In some instances, this could be fixed by using screws or pins to tighten it. In other instances, it may need to be replaced entirely. There are several kinds of window handles made from upvc. These include inline espagnolette handles, cockspur handles, and tilt and turn handles. Each type of handle is mounted and replaced in a different fashion.
Before buying a replacement handle it is essential to know the size of the one you have. This will help ensure that the new handle is the right size and will fit correctly within the window. All handles are calibrated in accordance with industry standards, so it is easy to find the correct size.
To determine the size of your handle first, take it out of the window by turning it to the open position. You should then be able see the size of the screw or pin that is holding it. Make use of a ruler or tape measure to determine how long the spindle is. Once you have the length of your spindle it is possible to purchase a replacement that is exactly the same length.
When you are looking to replace a handle you should be aware of the step height of the upvc window handle. The step height is measured from the base to the point where the handle sits on the frame. Typically, this will be around 21mm for uPVC windows or 9mm for aluminium. Dropping objects into the space will allow you to see how far the handle extends before it reaches an obstruction.
Cockspur handles usually have different backset heights depending on the style of window they are placed in. Inline Espag handles come with an average height of 43mm from centre to centre (2 fixing points). Cockspur handles have different backsets based on which window design they are placed in. This is because they feature a spur that extends from the handle and then locks over a cockspur wedge striker.
Install the New Handle
After you have chosen the new handle, make sure it is aligned with the screw holes on the door. Then, secure it with the screws supplied. Install the latch lever similar fashion to the handle on the main handle in the event that you are replacing the door handle. After that, attach the door trim to hide the mounting screws.
Tips: To remove the metal head from a wooden wedge place the handle on the floor so that its wide end is level with the ground. Then use a hammer and tap the narrow end. Be careful not to damage the handle or the spindle.